Lisebelisoa tsa Indasteri tsa DASQUA 0-1 Inch Ultra-Precision Outside Micrometer e nang le Stainless Steel Spindle le Carbide Tips Featured Image

Lisebelisoa tsa Indasteri tsa DASQUA 0-1 Inch Ultra-Precision Outside Micrometer e nang le Stainless Steel Spindle le Tips Carbide

E entsoe ka thata ho latela DIN 863;
Khoele ea spinele e thatafalitsoe, ea siloa 'me e lapiloe bakeng sa ho nepahala ho hoholo;
Ka senotlolo sa spindle;
Carbide e ncha e khethehileng e sebelisoang ho metha anvil ho e-na le mokhoa oa setso oa ho roala habonolo oa carbide;
Precision Ground Stainless STEEL threading rod e nkang sebaka sa alloy/carbon steel threading rod e sebelisoang haholo indastering;
Li-graduation tse hlakileng tsa laser-etched ka satin chrome finish bakeng sa ho bala ha bonolo;
Ka ho emisa ha ratchet bakeng sa matla a sa feleng (5- 8N 20% ho feta maemo a tloaelehileng a 5-10N);

Re romelle lengolo-tsoibila

LIKAROLOANA

Khoutu	Range	Kabo ea mangolo	A	B	C	L	IN	H	Ho nepahala
4111-8105-A	0-25	0.01	31	29.5	f6.5	133	58.5	f18	0.004
4111-8110-A	25-50	0.01	56	38	f6.5	137.2	76	f18	0.004
4111-8115-A	50-75	0.01	81	51	f6.5	162.7	91	f18	0.005
4111-8120-A	75-100	0.01	106	63.5	f6.5	187.7	105	f18	0.005
4111-8125-A	100-125	0.01	131	76	f6.5	214.5	125	f18	0.006
4111-8130-A	125-150	0.01	156	89	f6.5	251	142	f18	0.006
4111-5105-A	0-25	0.001”	31	29.5	f6.5	133	58.5	f18	0.00015”
4111-5110-A	25-50	0.001”	56	38	f6.5	137.2	76	f18	0.00015”
4111-5115-A	50-75	0.001”	81	51	f6.5	162.7	91	f18	0.0002"
4111-5120-A	75-100	0.001”	106	63.5	f6.5	187.7	105	f18	0.0002”
4111-5125-A	100-125	0.001”	131	76	f6.5	214.5	125	f18	0.00025”
4111-5130-A	125-150	0.001”	156	89	f6.5	251	142	f18	0.00025”

Litlhaloso

Lebitso la Sehlahisoa: Ultra-Precision Outside Micrometer
Nomoro ea ntho: 4111-8105-A
Mekhahlelo ea ho lekanya: 0~25 mm / 0~1''
Kabo ea mangolo: ±0.01 mm / 0.0004''
Ho nepahala: 0.004 mm / 0.0001575''
Warranty: Lilemo tse peli

Likaroloana

• E entsoe ka thata ho latela DIN 863;
• Khoele ea spinele e thatafalitsoe, ea siloa le ho koaheloa bakeng sa ho nepahala ho hoholo;
• Ka senotlolo sa spindle;
• Carbide e ncha e khethehileng e sebelisoang ho metha anvil ho e-na le mokhoa oa khale o aparoang habonolo oa carbide tip. Lifahleho tse lekanyang tsa anvil le spindle li hokahane ka kotloloho le ntho e lekantsoeng, ho bolelang hore libaka tsena tse 2 li na le monyetla oa ho hohla. Carbide-tipped haholo eketsa ho sebelisa bophelo ba micrometer;
• Precision Ground Stainless STEEL rod e kenyang sebaka sa alloy/carbon steel threading rod e sebelisoang haholo indastering;
• Hlakileng kabo ea mangolo ka laser-etched ka satin chrome qete bakeng sa ho bala ha bonolo;
• Ka ho emisa ratchet bakeng sa matla a sa khaotseng (5- 8N 20% ho feta maemo a tloaelehileng a 5-10N), sireletsa sesebelisoa sa hau se phahameng ka ho fetisisa ka hloko. Ha o tiisa micrometer, ratchet e emisa ka katleho matla a matla a ka bakang tšenyo ho spindle;

Kopo

Li-micrometer ke lisebelisoa tsa ho metha ka nepo tse sebelisang sekoti se lekantsoeng ho lekanya bohole. Litekanyo tsena li fetoleloa ho licheto tse kholo tsa screw tse khonang ho baloa ho tloha sekaleng kapa ho daela. Hangata li-micrometer li sebelisoa ho etsa thepa, ho etsa machining le boenjiniere ba mechini.
Li-micrometer tsa rona li sebetsa hantle bakeng sa ho etsa mapolanka, ho etsa mabenyane le tse ling, tse sebelisoang haholo malapeng, indastering le sebakeng sa likoloi, khetho e ntle bakeng sa mechini, baenjiniere, baetsi ba mapolanka, ba ratang ho itlosa bolutu, joalo-joalo ....

Mefuta ea li-micrometer

Ho na le mefuta e meraro ea micrometer: ka ntle, ka hare le botebo. Li-micrometer tse ka ntle li ka boela tsa bitsoa micrometer calipers, 'me li sebelisetsoa ho lekanya bolelele, bophara, kapa bophara bo ka ntle ba ntho. Li-micrometer tse ka hare hangata li sebelisoa ho lekanya bophara ba kahare, joalo ka lesoba. Li-micrometer tse tebileng li lekanya bophahamo, kapa botebo, ba sebōpeho leha e le sefe se nang le mohato, groove, kapa slot.

Molemo oa DASQUA

• Lisebelisoa tsa boleng bo holimo le ts'ebetso e nepahetseng ea machining li netefatsa boleng ba sehlahisoa;
• Sistimi e ka lateloang ea QC e lokeloa hore u e tšepe;
• Taolo e sebetsang hantle ea polokelo ea thepa le thepa e netefatsa nako ea hau ea ho fihla;
• Tiisetso ea lilemo tse peli e etsa hore u se ke ua tšoenyeha;